F Display window
G AUX input jack page 16
To connect a portable audio device.
H Z (eject) button
To eject the disc.
I
(front panel release) button page 7
J DSPL (display)/SCRL (scroll) button
page 10
To change display items (press); scroll the
display item (press and hold).
K SEEK –/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
Bluetooth audio device*
To skip tracks (press).
L MODE button page 10
To select the radio band (FM/AM)*
M BTM/CAT button page 10
To start the BTM function (press and hold).
N Number buttons
CD:
(1)/(2): ALBUM –/+*
To skip albums (press); skip albums
continuously (press and hold).
(3): REP page 10
(4): SHUF page 10
(6): PAUSE*
4
To pause playback of a CD on this unit.
To cancel, press again.
Radio:
To receive stored stations (press); store
stations (press and hold).
Bluetooth audio device*
(6): PAUSE*
4
To pause playback. To cancel, press
again.
Bluetooth phone:
(5): MIC page 13
O Receptor for the card remote
commander
P RESET button (located behind the front
panel) page 6
2
:
1
.
3
2
:
Q Microphone page 13
Note
Do not cover the microphone, the handsfree
function may not work properly.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 6).
qk < (.)/, (>) buttons
To control CD/radio, the same as (SEEK)
–/+ on the unit.
Setup, sound setting, etc., can be operated by
< ,.
ql DSPL (display) button
To change display items.
w; VOL (volume) +/– button
To adjust volume.
wa ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
ws SEL (select)/
The same as the select button on the unit.
wd M (+)/m (–) buttons
To control CD, the same as (1)/(2)
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
M m.
wf SCRL (scroll) button
To scroll the display item.
wg Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 In the case of a CD/MD changer, HD radio tuner or
SAT tuner being connected; when (SOURCE) is
pressed, the connected device ("MD", "HD," "XM"
or "SR") will appear in the display, depending on
which device is connected. Furthermore, if
(MODE) is pressed, you can switch the changer,
HD radio tuner band or SAT tuner band.
*2 When a Bluetooth audio device (supports AVRCP
of Bluetooth technology) is connected. Depending
on the device, certain operations may not be
available.
*3 When an MP3/WMA is played.
*4 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
(handsfree) button
9