CD/MD changer
Selecting the changer
1 Press (SOURCE) repeatedly until "CD" or
"MD" appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Unit number
Disc number
Playback starts.
Skipping albums and discs
1 During playback, press (1)/(2) (ALBUM –/
+).
(1)/(2) (ALBUM –/+)
To skip
album
Press and hold.
album
Press and hold, then press again
continuously
within 2 seconds.
discs
Press repeatedly.
discs
Press, then press again within 2
continuously
seconds and hold.
Repeat and shuffle play
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
appears.
Select
To play
TRACK
track repeatedly.
DISC
disc repeatedly.
SHUF DISC
disc in random order.
SHUF
tracks in the changer in random
CHANGER
order.
SHUF ALL*
tracks in all units in random
order.
* When one or more CD changers, or two or more MD
changers are connected.
To return to normal play mode, select "
or "SHUF OFF."
Tip
"SHUF ALL" will not shuffle tracks between CD units
and MD changers.
Rotary commander RM-X4S
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
PRESET/
DISC
SOURCE
The following controls on the rotary commander
require a different operation from the unit.
• PRESET/DISC control
The same as (1)/(2) (ALBUM –/+) on the
unit (push in and rotate).
• VOL (volume) control
The same as the volume control dial on the unit
(rotate).
• SEEK/AMS control
The same as (SEEK) –/+ on the unit (rotate, or
rotate and hold).
Changing the operative direction
The operative direction of the controls is factory-
set as shown below.
To increase
OFF"
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
D S P L
SE L
M O D E
M O D E
S E L
D SP L
ATT
SEL
DSPL
VOL
SEEK/AMS
To decrease
continue to next page t
MODE
OFF
17