Philips FC8149 Mode D'emploi page 15

Cleaning the motor protection filter
To maintain optimal performance, clean the motor protection filter at least
once a year.
1 Lift the dust container out of the appliance by its handle.
2 Pull the filter holder with the motor protection filter out of the
appliance.
3 Take the motor protection filter out of the holder. Shake the motor
protection filter over a dustbin to clean it.
4 Put the filter in the filter holder and slide the filter holder back into
the appliance.
5 Put the dust container back into the appliance.
replacement
Replacing filters
Always unplug the appliance before you replace a filter.
Replace the HEPA dust container filter and the HEPA exhaust filter every
12 months.
HEPA filters
- To remove the old filter and place the new filter, follow the instructions
for removing and placing the filters in chapter 'Cleaning and
maintenance'.
Ordering filters and accessories
- HEPA exhaust filters are available under type number FC8070.
- Dust container filters (HEPA and foam) are available under type
number FC8071.
storage
1 Switch off the appliance and remove the mains plug from the wall
socket.
2 Press the cord rewind button to rewind the cord.
3 Put the appliance in upright position. To attach the nozzle to the
appliance, insert the ridge on the nozzle into the storage slot.
Note: To ensure stable storage of the telescopic tube, adjust the tube to the
shortest length.
English
15