Publicité
Les langues disponibles
Les langues disponibles
English
14
1
2
1
2
2
1
15
To place the HEPA dust container filter back into the dust container,
press the large lug onto the spring-loaded button, insert the small
lugs into the hinges (1) and press the latch home until it locks in
place ('click') (2).
16
Put the dust container back into the appliance.
17
Close the cover ('click').
Note: You cannot close the cover if the dust container has not been placed.
Cleaning the HEPA exhaust filter
To maintain optimal performance, clean the HEPA exhaust filter each time
you empty the dust container.
1
To open the HEPA exhaust filter grille, grab the tabs and pull the
grille upwards to remove it from the appliance.
2
Remove the HEPA exhaust filter.
3
Rinse the pleated side of the HEPA exhaust filter under a hot slow-
running tap as described in steps 11 and 13 of section 'Emptying
the dust container' above.
4
Place the dry HEPA exhaust filter back into the appliance.
5
To close the HEPA exhaust filter grille, first align the lugs on the top
of the grille with the slots in the appliance (1). Then press the tabs
downwards until the grille locks into place (2) ('click').
Publicité
