Publicité
Les langues disponibles
Les langues disponibles
C
Cleaning and maintenance
damage plastic parts. Do not rinse directly with water or other
liquids during cleaning to avoid short circuits or affect electrical
insulation after immersion.
WARNING!
Please unplug the refrigerator for defrost and cleaning.
Defrosting
• Power off the refrigerator.
• Remove the food from the refrigerator and place it properly to
prevent food from melting.
• Clear the drain pipe (to use soft materials to prevent damage
to the liner), Prepare the water containers for defrosting.(pay
attention to clean the compressor compartment water draining
tray, avoding overflow to the ground).
• You can use the natural temperature for the natural defrost,
you can also use the ice shovel to eliminate the frost (to use
plastic or wooden ice shovel, for avoding damage to the liner
or pipe). You can also use the appropriate amount of hot water
to speed up the defrost, with a dry towel to dry the water after
defrosting.
• After defrosting, put back the foods in cabinet , and power on
the refrigerator.
Out of operation
• Power failure: In case of power failure, even if it is in summer,
foods inside the appliance can be kept for several hours; during
the power failure, the times of door opening shall be reduced,
and no more fresh food shall be put into the appliance.
• Long-time nonuse: The appliance shall be unplugged and then
cleaned; then the doors are left open to prevent odor.
• Moving: Before the refrigerator is moved, take all objects inside
out, fix the glass partitions, vegetable holder, freezing chamber
drawers and etc. with tape, and tighten the leveling feet; close
the doors and fix them with tape. During moving, the appliance
14
EN
Publicité
