Panasonic KX-TGA820EX Manuel Installateur page 8

TGA820EX(ex).book Page 8 Wednesday, July 11, 2007 3:09 PM
N KX-TG8220
Press and hold {x} on the base unit for about 5 seconds, until the
registration tone sounds.
3
With the handset still on the base unit, wait until a confirmation tone sounds
and w stops flashing.
Note:
• If an error tone sounds, or if w is still flashing, register the handset according
to the base unit's operating instructions.
• If all registered handsets start ringing in step 2, press {x} to stop. Start again
from step 1.
• The KX-TG8200 does not feature an answering system.
• Answering system features are available only when this handset is registered
to the KX-TG8220.
8