Geberit MONOLITH PLUS Mode D'emploi page 16

EN
Maintenance
Care and cleaning
The Geberit Monolith Plus sanitary module
is a high-quality, easy-care product.
ATTENTION
Surface damage caused by aggressive
and scouring cleaning agents
▶ Never use cleaning agents that
contain chlorine or which are acidic,
abrasive or corrosive.
Only use mild, liquid cleaning agents that
are kind to the skin. The Geberit AquaClean
cleaning set (art. no. 242.547.00.1) includes
a ready-made cleaning agent that is optimal
for cleaning all Geberit Monolith Plus
surfaces.
1
Clean the surface with a soft, damp
cloth and a mild liquid cleaning
agent.
2
Then dry the surface with a soft, lint-
free cloth.
16
Replace the filter
Prerequisite
– The odour neutralisation effect has
weakened.
– Odour extraction unit indicator light
permanently lights up red.
CAUTION
Possible health hazard
Impurities in the filter could lead
to contamination of the
breathing air.
▶ Replace the filter annually.
1
Hold the cistern lid with both hands,
lift it up and fold it towards the front.
2
Remove the spent filter, dispose of it
and insert a new filter.
3
Close the cistern lid.
4
Confirm the filter replacement in the
settings under the Replace filter
menu.
36028800640352395 © 02-2022
968.239.00.0(04)