Publicité
Les langues disponibles
Les langues disponibles
Installation
Do not install the product in a
low temperature room or in a
room where there is a risk of
frost occurring. At temperature
around
freezing
product may not be able to
operate properly: there is a risk
of damage if the water is
allowed
to
hydraulic circuit (valves, hoses,
pumps). For a better product
performance the ambient room
temperature must be between
5-35°C.
Please
operating
in
(between +2 and +5°C) might
simply some water condensation
and water drops on floor.
In cases where the dryer is
installed on top of a washing
machine, a suitable stacking kit
must be used according to the
configuration of your appliance:
- Stacking kit "standard size": for
washing
minimum depth of 44 cm;
- Stacking kit "slim size": for
washing
minimum depth of 40 cm.
- Universal stacking kit with
sliding: for washing machine
with
minimum
47 cm.
point
the
freeze
in
the
note
that
cold
condition
machine
with
machine
with
depth
The
stacking
obtainable from service. The
instructions for installation and
any
fixing
provided with the stacking kit.
NEVER install the dryer up
near curtains.
The appliance must not be
installed behind a lockable door,
a sliding door or a door with a
hinge on the opposite side to
that of the tumble dryer, in
such way that a full opening of
the tumble dryer door is restricted.
For your safety, the appliance
must be correctly installed. If
there is any doubt about installation,
call Service for advice.
Once the machine is in place
the feet should be adjusted to
ensure that the machine is
level.
Electrical
safety instructions
The technical details (supply
voltage and power input) are
of
indicated on the product rating
plate.
59
kit
shall
attachments,
connections
be
are
and
Publicité
