Publicité
Les langues disponibles
Les langues disponibles
left attached to a rotating part of the power tool
may result in personal injury.
e Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g If devices are provided for the connection of
dust extraction and collection facilities, en-
sure these are connected and properly used.
Use of dust collection can reduce dust-related
hazards.
h Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe injury with a fraction of a sec-
ond.
4
Power tool use and care
a Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
c Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any ad-
justments, changing accessories, or storing
power tools. Such preventive safety measures
reduce the risk of starting the power tool acciden-
tally.
d Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to oper-
ate the power tool. Power tools are dangerous
in the hands of untrained users.
e Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation. If
damaged, have the power tool repaired before
use. Many accidents are caused by poorly main-
tained power tools.
f Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the pow-
er tool for operations different from those intend-
ed could result in a hazardous situation.
h Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpect-
ed situations.
5
Battery tool use and care
a Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
14
b Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c When battery pack is not in use, keep it away
from other metal objects, like paperclips,
coins, keys, nails, screws or other small metal
objects that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
d Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medi-
cal help. Liquid ejected from the battery may
cause irritation or burns.
e Do not use a battery pack or tool that is dam-
aged or modified. Damaged of modified batter-
ies may exhibit unpredictable behaviour resulting
in fire, explosion or risk of injury.
f Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 130 °C may cause explosion.
g Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the bat-
tery and increase the risk of fire.
6
Service
a Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts. This will ensure that the safety of the
power tool is maintained.
b Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
Hedge Trimmer Safety Warnings
a) Do not use the hedge trimmer in bad weather con-
dition, especially when there is a risk of lightning.
This reduces the risk of being struck by lightning.
b) Keep all power cables and lines away from the
cutting area. Power cables and lines can be hidden in
hedges or bushes and accidentally cut by the blade.
c) Wear ear protection. Adequate protective equip-
ment will reduce the risk of hearing loss.
d) Hold the hedge trimmer by the insulated gripping
surfaces only, because the blade may contact hid-
den wiring. Blades contacting a "live" wire may make
exposed metal parts of the hedge trimmer "live" and
could give the operator an electric shock.
e) Keep all body parts away from the blade. Do not
remove cut material or hold the material to be cut
when the blades are moving. Blades continue to
move after the switch is turned off. A moment of inatten-
tion while operating the hedge trimmer may result in se-
rious personal injury.
f) When clearing jammed material or servicing the
hedge trimmer, make sure all power switches are
turned off and the battery pack is removed or dis-
connected. Unexpected actuation of the hedge trimmer
while clearing jammed material or servicing may result
in serious personal injury.
g) Carry the hedge trimmer by the handle with the
blade stopped and take care not to operate any
switch. Proper carrying of the hedge trimmer will de-
crease the risk of inadvertent starting and resultant per-
sonal injury from the blades.
English
Publicité
