Publicité
Les langues disponibles
Les langues disponibles
▶
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
▶
Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any
adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
▶
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of untrained users.
▶
Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition
that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
▶
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to
control.
▶
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
▶
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected situations.
Battery tool use and care
▶
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk
of fire when used with another battery pack.
▶
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
▶
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a
fire.
▶
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
▶
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
▶
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130° C (265 °F) may cause
explosion.
▶
Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions.
Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
Service
▶
Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of
the power tool is maintained.
▶
Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service
providers.
Additional safety instructions, knockout punch
Personal safety
▶
Comply with the country-specific standards and safety instructions for operation of knockout punches and all work on, with or in proximity
to electrically live equipment and lines.
▶
Persons who work in the vicinity of live lines must receive regular instruction and training.
▶
Use the knockout punch only when it is in technically faultless condition.
▶
Never tamper with or modify the knockout punch in any way.
▶
Keep the air vents clear at all times. Risk of burn injuries due to blocked air vents.
▶
If you notice oil escaping, cease working with the tool and consult Hilti Service. Immediately remove the leaked oil.
▶
During the punching operation great care must be taken to ensure that the hands and fingers are kept well clear of the punching head.
▶
Switch the product on only after you have brought it to the working position.
▶
Wait until the product has come to a complete stop before you lay it down.
▶
Always hold the knockout punch firmly with both hands on the grips provided for the purpose.
▶
Do not secure a belt hook or a retaining strap to this power tool.
▶
Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and installed accessories are secure.
▶
Do not look directly into the light source (LED) of the product and do not aim the beam at other persons' faces. Risk of dazzling or eye
damage.
▶
Keep the tether clean and dry.
Electrical safety
▶
Before use of the knockout punch, all live cables and other equipment carrying electric voltage within the area in which the user is working
are to be switched off. If this is not possible, the corresponding safety precautions for working in proximity to electrically live cables or
equipment applicable in your country must be implemented and observed.
▶
Before beginning work, check the working area for concealed electric cables or gas and water pipes. External metal parts of the product
could give you an electric shock or cause an explosion if you accidentally damage an electric cable or a gas or water pipe.
Power tool use and care
▶
After approx. 50 consecutive punching operations, switch the knockout punch off and allow it to cool down for about 15 minutes. Overheating
can lead to damage to the knockout punch.
▶
Store the knockout punch in a dry place inaccessible to children and unauthorized persons.
▶
Hilti recommends having the knockout punch overhauled by Hilti Service after 15,000 punching operations.
*2321734*
2321734
3
Publicité
