Detaching the Front Panel
Before detaching the front panel, be sure to press the OFF button
first. Then press the RELEASE button to open up the front panel,
and detach the panel by pulling it towards you as illustrated.
RELEASE button
x
Do not drop the panel when detaching it from the unit.
Attaching the Front Panel
Apply the right hand side of the front panel to the unit by attaching
part ® ef the front panel to part © of the unit as illustrated and
push until it clicks.
Do not press hard or apply excessive pressure to the display
window of the front panel.
Caution alarm
If you turn the ignition key to the
OFF position without removing
the front panel, the caution alarm
will be activated and a beep
sound will be heard for a few
seconds.
Notes
@ Make sure that the front panel
is the right way up when
attaching it to the unit. It
cannot be attached upside
down.
¢ When attaching the front panel,
do not press it hard against the
unit. It can be easily attached
by pressing lightly.
@ Never leave the detached front
panel in your car if it is parked
in direct sunlight. There could
be a considerable rise in
temperature inside the car.
@ When you carry the front panel
with you, put it in the supplied
front panel case.
:
The display window may
become warm while the unit is
operated. This is not a sign of a
malfunction.