Publicité
Les langues disponibles
Les langues disponibles
V1.0
2.
Do not use a handle extension for the jack handle.
3.
Make sure the saddle is fully positioned under the load before operating.
4.
Make sure the load is stable, so it does not shift when lifting or lowering.
5.
When using more than one multipositional hydraulic bottle jack to lift
a load, each multipositional hydraulic bottle jack should have the same
lifting capacity of the entire load being lifted. The lifting speed should
be synchronized and the load on each jackmultipositional hydraulic bottle
jack should be balanced to prevent the load from tipping.
6.
Do not force the lifting screw past its safety stop, as the screw may come
out of the jack resulting in personal injury or property damage.
7.
Once the load is lifted to the desired height, support the load with jack
stands to prevent injury should the multipositional hydraulic bottle jack
fail. Do not work under a load that is supported only by a jack.
8.
Do not attempt to move the load while on the multipositional hydraulic
bottle jack. The jack must only be used in a static position for lifting and
lowering loads. Ensure that the load remains stable at all times.
9.
Do not push a load off the multipositional hydraulic bottle jack; lower
carefully.
10. Ensure that there are no obstructions under the load and that the area is
clear before lowering the device.
11.
Lower the load in a slow and controlled manner to prevent shock loading.
Shock loading may cause the device to fail and lead to property damage
and/or severe personal injuries.
12. Always keep the lifting screw lubricated to allow easy operation and
prevent rust.
LIFTING PRECAUTIONS
WARNING! Ensure that the load is secure and centered on the device. Do
not allow the load to move or tilt as the device may kick out causing
injury to the operator and/or cause the load to fall.
1.
Do not exceed the maximum capacity to prevent equipment failure or
damage.
2.
Always place the device on a hard, level surface capable of supporting
the load. Allow enough clearance around the device and the load for
movement.
Page 5
MULTI-POSITIONAL HYDRAULIC BOTTLE JACK
www.princessauto.com / 1-800-665-8685
9094996
Publicité
