Publicité
Les langues disponibles
Les langues disponibles
V1.0
•
For vehicles with a manual transmission, engage the parking brake
and leave the car in reverse or 1
manual for the correct gear.
2.
Place wheel chocks that fit the wheel curve on either side of the vehicle' s
remaining wheels.
3.
Place the jack only on support points or areas specified by the vehicle
manufacturer (consult owner' s manual).
4.
Lift the vehicle to a height that leaves enough room to place the jack
stands.
5.
When the work is done, raise the load enough with the jack to carefully
remove the jack stands.
6.
Slowly and carefully lower the load.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3.
Keep the tool handles or gripping surfaces clean and dry.
4.
Maintain the tool' s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
5.
Have a qualified technician inspect the jack:
a.
Once a year.
b.
After receiving a shock load. Take the jack out of service until the
technician certifies that it is safe to use.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
HYDRAULIC MAINTENANCE
HYDRAULIC RAM MAINTENANCE
Monthly maintenance is recommended for the hydraulic ram. Any restrictions
due to dirt, rust, etc. can cause the either slow movement or extremely rapid
Page 11
MULTI-POSITIONAL HYDRAULIC BOTTLE JACK
st
gear. Consult your vehicle owner' s
www.princessauto.com / 1-800-665-8685
9094996
Publicité
