Publicité
Les langues disponibles
Les langues disponibles
S
y
m
b
S
y
m
b
Memorise the meaning to be able to operate the device more
safely and to protect yourself and other from possible injuries.
Carefully read operator's manual and the safety
instructions before starting the machine and ob-
serve the instructions when operating.
Wear eye and
ear protection.
Wear protective
gloves.
Pulling out the battery
before starting any work (cleaning, mainte-
nance, repair, etc.) on the device.
when interrupting work, during transport and
storage.
Speed regulation (infinitely variable)
MIN = 580 rpm
MAX = 940 rpm
This product complies with European regulations
specifically applicable to it.
Machine of the protection class II
(double insulated)
Electrical devices do not go into the domestic
rubbish. Give devices, accessories and packag-
ing to an ecofriendly recycling.
According to the European Directive 2012/19/EU on electri-
cal and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a
facility for an environmentally compatible recycling.
N
o
r
m
a
l
N
o
r
m
a
l
This agitator is suited for DIY work for mixing liquid and
powdry building material such as: paints, mortar, adhe-
sives, plaster, grouting compounds, knifing fillers, coat-
ing compounds.
Only beaters intended for the device with the max. diameter
115 mm (RLC 40-10 G) must be used.
This machine must not be used
as a drilling machine or as a drive for other devices
for polishing, grinding, sharpening, engraving with any
attachments.
Any other utilisation counts as improper use, especial-
ly mixing combustible or explosive materials (
explosion hazard) and use with foodstuffs. The manufactur-
er is not liable for damages resulting from improper use.
the user alone shall bear the risk.
The intended usage also includes compliance with the op-
erating, servicing and repair conditions prescribed by the
12
o
l
s
m
a
c
h
i
n
e
o
l
s
m
a
c
h
i
n
e
Wear dust mask.
Protect against
humidity.
i
n
t
e
n
d
e
d
u
s
e
i
n
t
e
n
d
e
d
u
s
e
manufacturer and following the safety instructions included
in the instructions.
The relevant accident prevention regulations for the opera-
tion as well as the other generally acknowledged occupa-
tional medicine and safety rules must be complied with.
Unauth orised modifi ca tio ns on th e agitator exclude a
liability of the manufacturer for damages of any kind result-
ing from it.
Only persons who are familiarised with the device and in-
formed about possible risks are allowed to prepare, operate
and service this device. Repair works may only be carried
out by us or by a customer service agent nominated by us.
Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety instructions" and
the "Normal intended use" as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will re-
duce the risk of personal injury or damage to the equipment.
Failure to observe the safety precautions can lead to injury
to the operator or damage to property.
Contact with the rotating shaft (6) (risk of bruises).
Reaching in the rotating beater (risk of cuts)
Risk from electricity, by using non-standard electrical con-
nections.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
RLC 40-10 G: 5,56 m/s²; K = 1.5 m/s²
Warning!
The actual vibration emission level during the use of the ma-
chine may differ from that indicated in the operating instructions
or indicated by the manufacturer. This may be caused by the
following factors to be minded before and during the use:
- Proper use of the machine
- Correct operating of the machine
- Proper condition of the machine for use
-
Proper condition of the beaters or installation of the correct
beater
fire and
- Handles and optional anti-vibration handles properly
mounted on the machine body
When you feel uncomfortable or notice discoloration of skin on
your hands during the use of the machine, stop working imme-
diately. Observe sufficient break times to rest. Failure to have
R
i
s
i
d
u
a
l
r
i
s
k
s
R
i
s
i
d
u
a
l
r
i
s
k
s
Vibrations
(hand arm vibrations)
Publicité
