10. CLEANING AND MAINTENANCE
10.1 Before Maintenance
Turn the system off before cleaning. To
clean, wipe with a soft, dry cloth. Do not
use bleach or abrasives.
WARNING!
Power supply must be disconnectd
before cleaning the indoor unit.
• A cloth dampened with cold
water may be used on the indoor
unit if it is very dirty. Then wipe it
with a dry cloth.
• Do not use a chemically treated
cloth or duster to clean the unit.
• Do not use benzine, thinner,
polishing powder, or similar
solvents for cleaning. These may
cause the plastic surface to crack
or deform.
• Never use water hotter than
40ºC/104ºF to clean the front
panel, it could cause deformation
and discoloration.
10.2 Cleaning the Unit
Wipe the unit with a soft dry cloth only. If
the unit is very dirty, wipe it with a cloth
soaked in warm water.
10.3 Cleaning the Filters
A clogged air filter reduces the cooling
efficiency of this unit. Please clean the filter
once every 2 weeks.
1. Lift the indoor unit front panel up to an
angle until it stops with a full support
from the bracket.
2. Hold the dust flter handle and lift it
up slightly to take it out from the filter
holder.
Dust filter handle
3. Then pull the dust filter downwards out
of the indoor unit.
4. The healthy air freshening filter
(if applicable) are fixed on the
dust filter.
• Remove the healthy filter from the
support frame of the dust filter.
• Clean the healthy filter at least
every 3 months and replace every 6
months.
• Clean with vacuum cleaner if
possible.
Clean the Dust filter with a vacuum
cleaner or water, then dry it up in cool
place.
Dust filter
ENGLISH
21
Dust filter
Healthy filter