Electrolux ES18K11BCCI Manuel D'utilisation page 18

18
10. Wireless function (optional)
Continuous pressing LED button 7 times
in 10s, then enter the wireless binding
status.
• Please refer to the "Quick
11. Short Cut function (optional)
Press the Short cut button to enable or
disable the Short cut function.
On the first time connecting to the power,
if press the Short cut button, the unit will
operate on AUTO mode, 26 °C, and fan
speed is Auto.
Press this button when remote controller
is on, the system will automatically revert
back to the previous settings including
operating mode, setting temperature, fan
speed level and sleep feature (if activated).
If pressing more than 2 seconds, the
system will automatically restore the
current operation settings including
operating mode, setting temperature, fan
speed level and sleep feature (if activated).
Connection Guide" for the
Wireless connection details.
12. Lock function
Press Turbo and Clean buttons at the
same time for 5 seconds, you can lock
the remote controller, and press Turbo
and Clean buttons at the same time for 1
second to unlock it.
13. Set function
Press the Set button to enter the function
selection, then press Set button or
and button to select the desired
function. The matched symbol will flash on
the display area, press the OK button to
confirm. To cancel the selected function,
just perform the same procedures as
above.
Breeze Away Fresh Sleep
• If your remote controller already
has Breeze Away button, Fresh
button or Sleep button, you can
not use the SET button to select
the Breeze Away, Fresh or Sleep
feature.
Follow Me Wireless