Electrolux ES18K11BCCI Manuel D'utilisation page 20

20
8. OPERATING TEMPERATURE
Model climate Type
Important!
1. Optimum performance will be achieved
within these operating temperatures.
If air conditioner is used outside of
the above conditions, certain safety
protection features might come into
operation and cause the unit to function
abnormally.
9. EMERGENCY OPERATION
Manual control button
Ambient temperature (Cooling)
18°C~43°C (Fixed speed)
T1
0°C~50°C (Inverter Type)
18°C~52°C (Fixed speed)
T3
0°C~52°C (Inverter Type)
Operating temperature ranges
2. If the air conditioner runs for a long time
in cooling mode and the humidity is
high, condensed water may drip out of
the unit. Please sets the vertical air flow
louver to its maximum angle (vertically
to the floor), and set HIGH fan mode.
Units are equipped with a switch to run
emergency operation mode. It can be
accessed by opening the front panel.
This switch is used for manual operation
in case the remote controller fails to work
or maintenance necessary.
1. Open and lift the front panel up to
an angle until it remains fixed with a
clicking sound.
2. One press of the manual control
switch will lead to the forced AUTO
operation. If press the switch twice
within five seconds, the unit will
operate under forced COOL operation.
3. Close the panel firmly to its original
position.
Ambient temperature (Heating)
-7°C~24°C (Fixed speed)
-15°C~30°C (Inverter Type)
-7°C~24°C (Fixed speed)
-15°C~30°C (Inverter Type)
• The unit must be turned off
before operating the manual
control button. If the unit is
operational, continue pressing
the manual control button until
the unit is off.
• This switch is used for testing
purposes only. You had better
not choose it.
• To restore the remote controller
operation, use the remote
controller directly.