Publicité
Les langues disponibles
Les langues disponibles
SpeedBoost function
The SpeedBoost function can be used to heat large
amounts of water faster than by using heat level
Limitation on use
This function is available on all elements, provided that
no other element in the same group is operating, (see
picture). If this is not the case, the
flash on the selected element display; then it will
automatically set the power level
Setting SpeedBoost
Select an element.
1.
Touch Speed Boost. The function is set.
2.
Turning SpeedBoost off
Select an element on which SpeedBoost is set.
1.
Touch Speed Boost. The function is deactivated.
2.
Note: In certain circumstances, the function may be
deactivated automatically to protect the internal
electronic components of the cooktop.
Cook time
You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
CAUTION
9
When using the timer, always keep an eye on the
▯
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
▯
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
▯
power switch after each use.
.
Š
and
symbols will
›
Š
.
Š
Setting a cook time
The cooktop must be turned on.
Select the desired element and power level.
1.
Touch the Timer key twice. The
2.
in the element display and
display.
Whithin 10 seconds enter the desired cook time using
3.
the number keys.
After a few seconds the timer will start to count down.
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator
the element display and the timer display shows
10 seconds. The
indicator in the element display
x
stays on.
Touch the Timer key, to turn the indicators and the beep
off.
Changing or cancelling cook time
Select the desired element.
1.
Touch the Timer key twice. The
2.
in the element display and the remaining cook time is
displayed. Adjust the cook time using the number
keys.
Adjust the cook time using the number keys. To
3.
cancel cook time set the timer to
the 0 key twice.
Automatic timer
With this function you may select a cook time for all
elements. Once an element is turned on, the selected
time will begin to count down. The element will
automatically turn off when the cook time has elapsed.
Instructions on activating the automatic timer are found in
the chapter "Basic settings".
Note: The cook time can be changed or cancelled for
any element:
Select the desired element and touch the Timer key
twice. The remaining cook time for the element is
displayed. Adjust the cook time using the number keys,
or deactivate it by setting the the timer value to
indicator lights up
x
‹‹
is shown in the timer
‹
appears in
for
‹‹
indicator lights up
x
by touching
‹‹
.
‹‹
13
Publicité
