Publicité
Les langues disponibles
Les langues disponibles
Operating the vacuum cleaner
If the brush clings to floors (such as a carpet, a mat, or bedding, etc.) or does not spin properly,
change the suction power to 'MIN' or 'MID' mode.
Jet
(3sec)
Jet
(3sec)
01
04
18
English
Power ( ) on / off
When pressing the power button, the vacuum
cleaner starts operation in 'MID' mode.
Controlling suction power
You can control the suction power of the
vacuum cleaner.
• + button: Increases suction power.
• - button: Decreases suction power.
❇ 'JET' mode: Hold the [+] button down for
3 sec. while in 'MAX' mode.
❇ The 'JET' mode is not displayed separately
on the screen.
Checking the display
02
01 Clogged: Something is clogging the
03
dustbin, pipe, or the connected suction
accessory.
02 Spinning brush stuck: Something is
stuck in the connected spinning brush
accessory.
❇ The spinning brush stuck display will not
turn on if the spinning brush motor stops
because it has overheated.
03 No Filter: The washable micro filter is not
assembled correctly
04 Suction power: Displays the current
suction power.
❇ If either 01, 02, or 03 blinks a few times
and the vacuum cleaner stops operation,
please take action by referring to the
maintenance part of this manual.
Publicité
