Checking The Hdd Status; Setting Up The Hdd Alarm - Abus TVVR20001 Manuel Utilisateur

Warning:
If only one HDD is installed and this is set to
"Read-only", then the device cannot make re-
cordings.
Redundancy:
At least two HDDs are installed.
The redundant HDD makes an extra copy of the
recordings. This is used as a data backup.

R/W
At least one HDD must have the R/W status
(Read/Write). Otherwise, no recordings are possible.

Checking the HDD status

The status of each HDD can be checked in the "Mainte-
nance" menu. S.M.A.R.T. information (Self-Monitoring,
Analysis and Reporting Technology) is stored in the log
data.

Call up the log file and search according to the infor-
mation/S.M.A.R.T. HDD (see page 43).

Setting up the HDD alarm

You can specify alarms to inform you of HDD errors.

To do this, call up "Exception" in the "System Set-
tings" menu (see page 40).
Device menu
35