Télécharger Imprimer la page

Milwaukee M18 FUEL HACKZALL 2719-20 Manuel De L'utilisateur page 3

Publicité

Les langues disponibles

Les langues disponibles

• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
HACKZALL
• Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting ac-
cessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give
the operator an electric shock.
• Use clamps or another practical way to secure
and support the workpiece to a stable platform.
Holding the work by hand or against your body
leaves it unstable and may lead to loss of control.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
Some dust created by power sanding,
WARNING
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
Cat. No. ..................................................... 2719-20
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type................................................M18™
Recommended Ambient
No Load Strokes per Minute ........................ 0 - 3000
Length of Stroke .................................................7/8"
1. Shoe
2. Quik-Lok
3. LED
®
4. Trigger
5. Handle
6. Trigger lock
cific charging instructions, read the operator's
manual supplied with your charger and battery.
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
may be hazardous.
The Quik-Lok
shank universal Hackzall
MILWAUKEE blades for best performance. When
selecting a blade, choose the right type and length.
Many types of blades are available for a variety of
applications: cutting metal, wood, nail-embedded
wood, scroll cutting, roughing-in, and contours.
Many lengths are also available. Choose a length
long enough to extend beyond the shoe and your
work throughout the stroke. Do not use blades less
than 3-1/2" long since they won't extend beyond
the shoe throughout the stroke.
3
SYMBOLOGY
Volts
Direct Current
No Load Strokes per Minute (SPM)
UL Listing for Canada and U.S.
C
US
SPECIFICATIONS
Operating Temperature ......................0°F to 125°F
FUNCTIONAL DESCRIPTION
1
2
3
blade clamp
®
(not shown)
ASSEMBLY
Recharge only with the charger
WARNING
specified for the battery. For spe-
Removing/Inserting the Battery
Always remove battery pack before
WARNING
changing or removing accessories.
Only use accessories specifically
WARNING
recommended for this tool. Others
Selecting a Blade
Blade Clamp can be used with all 1/2"
®
4
and Sawzall
blades. Use
®
®
6
5

Publicité

loading

Ce manuel est également adapté pour:

M18 fuel hackzall 2719-21