Synchronized Recording Function - Denon DRM-555 Mode D'emploi

ENGLISH

SYNCHRONIZED RECORDING FUNCTION

• Convenient synchronized recording can be performed when used in
combination with a DENON CD player equipped for the synchronized
recording function.
• Synchro jack (SYNCHRO) Connection connect the Synchro jack (SYNCHRO)
with a DENON CD player which is equipped with a Synchro jack
(SYNCHRO), then make a synchronized recording. Use the connection cord
supplied with this cassette deck.
• Switch on your amplifier or receiver and the CD player.
• Set the Tape Monitor switch on your amplifier or receiver to the source
position.
EJECT
5
T MER
REC OFF PLAY
¢ON £OFF
q Load the tape, the disc you want to record into the CD player.
w Following the recording instructions on page 10, set the Dolby NR mode,
and the input level.
e Set the CD player to the stop or pause mode.
r Press the Rec/Rec Mute button (REC/REC MUTE) (
3
button ( REC PAUSE) simultaneously. The cassette deck and CD player
are automatically set to the synchronized recording mode. The "SYNC"
indicator flashes on the cassette deck and the synchronized recording
mode is indicated on the CD player.
(For details, refer to the CD player's operating instructions.)
t To stop synchronized recording, press the Stop button (
cassette deck and stop button on CD player.
The synchronized recording mode is cancelled for both the cassette deck
and CD player.
y To stop synchronized recording temporarily, press the Stop button (
on the CD player. A 5-second blank space is created on the tape, after which
the recording pause mode is set. The "SYNC" indicator flashes.
To resume synchronized recording, press the Play button (PLAY) on the CD
player.
12
DRM 555
PREC S ON AUDIO COMPONE CASSETTE TAPE DECK
AUTO REVERSE
4
) and Rec Pause
CD player
DRM-555
dB 40 30 20 -10 -5 3 -1 0 +1
L
R
‚¤‚‚
REMOTE SENSOR
PLAY 2 STOP 3 REC PAUSE
DIRECTION REC/REC MUTE
CD SYNCHRO REC
Notes:
• If synchronized recording is started when the CD player is in a mode other
than the stop or pause mode or when no disc is set, the "SYNC" indicator
on the cassette deck flashes and the recording pause mode is set until
synchronized recording is possible on the CD player.
• In the synchronized recording mode, only the Stop button (
function.
Caution:
• Do not set the cassette deck to the synchronized recording mode when the
CD player is in the play mode. Also, do not turn off the power of the
2 cassette deck or the CD player during synchronized recording. Doing so can
STOP) on
result in malfunction.
• During the editing operation, when using the editing functions on the CD
player, be sure to select a tape with a sufficiently long recording time.
2
STOP)
LINE OUT
SYNCHRO
R L
Power supply outlet
L
R
L NE L NE
SYNCHRO
OUT N
INPUT LEVEL
5
RESET
+3 +5 +10
COUNTER
MEMORY
MPX
DOLBY NR REV MODE
B OFF C
PHONE LEVEL BIAS FINE
PHONES
+
MIN MAX LEFT
BALANCE
RIGHT
2
STOP) will