Dogtra iQ MINI Manuel Du Propriétaire page 8

1st Dog 2nd Dog
12
1st Dog/2nd Dog Toggle Switch
The 1st Dog/2nd Dog Toggle Switch is
on the left of the Rheostat Dial.
I - 1st Dog
Slide the switch to the left underneath
"I" and press any of the buttons to
operate the first receiver.
II - 2nd Dog
Slide the switch to the right underneath
"II" and press any of the buttons to
operate the second receiver.
3. Receiver Fitting
Proper Fit
The receiver should be fitted so that the
conductive plastic contact points press
firmly against the dog's skin. You should
be able to fit two fingers underneath the
collar strap. The best location is on either
side of the dog's windpipe.
Improper Fit
A loose fit can allow the receiver to
move around on the dog's neck. When
this happens, the contact points may
rub against the skin and cause irritation.
If the receiver is too loose, the contact
will not be consistent and cause the
corrections to be inconsistent. Dogtra
uses conductive plastic contact points
and anti-microbial plastic to protect the
dog's skin.
13