Operation - LawnMaster GT1018S Mode D'emploi

OPERATION

WARNING
Never use the trimmer without its safety guard. Always check the operability of the trimmer before it
is used. Check that the mains voltage is the same as indicated on the rating plate. Always wear
goggles when working with the trimmer.
NOTE:
Once the lower and upper sections of the trimmer has been assembled, they can not
be seperated.
Switching ON and OFF ( Fig. 5 )
1. Form a loop in the end of the extension cable, conduct it through the opening in the upper
handle (2) and hang it on to the strain relief (3).
2. Connect the trimmer to the mains socket.
3. Ensure a secure stance and hold on to the trimmer with two hand. Do not deposit the cutting
head on the ground.
4. To switch on depress the ON/ OFF switch (1). Release the switch to switch off.
WARNING
After the trimmer has been switched off the cutting head will continue to rotate for a few
seconds. Keep hands and feet well away.
WARNING
The ON / OFF switch must not be locked in place. The trimmer must not be used if the
switch is damaged. There is the immediate danger of injury if the motor does not switch
off after the ON /OFF switch has been released.
NOTE:
Always remove grass residue from cutter so that the cutting effect is not impaired.
Danger of injury!
①
③
②
Fig. 5
11