Setup and installation
Warning!
reader� Risk of injury to person or damage to the system�
Warning!
fire.
Caution!
lift or move the reader�
Caution!
Risk of malfunction caused by overheating�
Note:
Mabtech for service�
1.
Lift the Mabtech IRIS
ELISpot reader out of the box by the
handles�
Follow the instructions in this manual when you lift or move the
Do not use or keep flammable liquids near the system. Risk of
The reader is heavy� Place it on a solid table� Use two people to
Keep other equipment more than 10 cm away from the reader�
Keep the packaging in case the system needs to be sent back to
FluoroSpot/
TM
2.
Place the Mabtech IRIS
ELISpot reader upright on a solid
table� Remove the inner packaging�
Make sure that you have received all
components specified in the section
"In this package" on page 8�
FluoroSpot/
TM
11