Abicor Binzel BRS-CC Mode D'emploi page 22

English Translation of the original operating instructions
EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
Operation Instructions which may become necessary due to misprints, inaccuracies or improvements to the product. Such
changes will however be incorporated into subsequent editions of the Instructions. All trademarks mentioned in the operating
instructions are the property of their respective owners.
1 Identification
1.1 EU Declaration of Conformity
1.2 Responsibilities of the User
2 Product Description
2.1 Designated Use
2.2 Use contrary to the designated use
2.3 Technical Data
2.4 Abbreviations
2.5 Nameplate
2.6 Classification
2.7 Emergency information
2.8 Safety symbols marking
3 Scope of delivery
3.1 Transport
3.2 Storage
4 Functional Description
4.1 Cleaning station sub-assembly
4.2 Injector unit VI sub-assembly
4.3 DAV wire cutting device sub-assembly
4.4 Optional sub-assemblies / accessories
5 Putting into operation
5.1 Cleaning station BRS-LC
5.2 Injection unit VI
5.3 DAV wire cutting device
5.4 Fastening the prism
5.5 Mounting the milling cutter
5.6 Setting up the clamping position
5.7 Setting up the compressed-air motor
5.8 Establishing the electrical connection
5.9 Flow chart
5.10 Connecting the pneumatic system
EN - 1
EN-2
6 Operation
EN-2
EN-2
7 Putting out of operation
EN-2
8 Maintenance and cleaning
EN-2 8.1 Weekly cleaning
EN-2 8.1.1 Changing the cutter
EN-3 8.2 Monthly cleaning
EN-4
EN-4
9 Troubleshooting
EN-5 9.1 Cleaning station BRS-LC
EN-5 9.2 Injection unit VI
EN-5 9.3 DAV wire cutting device
EN-6
10 Dismounting
EN-6
EN-6
11 Disposal
11.1 Materials
EN-6 11.2 Consumables
EN-7 11.3 Packaging
EN-7
EN-8
12 Notes
EN-8
EN-8
EN-9
EN-9
EN-10
EN-10
EN-10
EN-11
EN-11
EN-12
EN-13
EN-14
BRS-CC
EN-15
EN-15
EN-15
EN-15
EN-16
EN-16
EN-16
EN-16
EN-16
EN-17
EN-17
EN-17
EN-18
EN-18
EN-18
EN-19