¡ You can find out which battery charging
times are achieved with the quick
1
charger
in the instructions of for the
1
quick charger
.
Battery charging
status of
80% in hrs
97%–100% in hrs
Battery runtimes
You can find an overview of the battery runtimes, depending on the battery that is used,
here.
Note
The following modes affect the battery runtime:
¡ Mode 1: Energy-saving mode with non-electrical accessory
¡ Mode 2: Energy-saving mode with electrical floor nozzle
¡ Mode 3: Auto mode with electrical floor nozzle
¡ Mode 4: Turbo mode with electrical floor nozzle
Runtime
Mode 1 up to min.
Mode 2 up to min.
Mode 3 up to min.
Mode 4 up to min.
Notes
¡ Like every Li-ion battery, the batteries
from the Power for ALL 18 V series wear
out over time, meaning that the battery
capacity and the runtime decrease. This
is a natural aging process and not the
result of a material error, manufacturing
error or material defect.
¡ You can delay the natural wear by using
the following measures:
– Only charge the battery in the temper-
ature range between 0 °C and 45 °C.
– Only store the battery in the temperat-
ure range between -20 °C and 50 °C.
– Do not store the battery for an exten-
ded period of time if it is fully charged
or fully discharged.
1
Depending on the appliance specifications
18 V 3,0 Ah
4
5
18 V 3,0 Ah
45
35
15
10
Tip: If the quick charger
charging status of approx. 80%, you can re-
move and use the battery.
18 V 4,0 Ah
4
4½
18 V 4,0 Ah
65
50
20
10
Installing the base station
▶ Check whether any household wiring
could be damaged in the installation
area.
▶ Do not install the base station horizont-
ally or vertically above, below or next to a
socket.
3
6
→ Fig.
-
Inserting and charging the bat-
tery
7
8
→ Fig.
-
Charging
▶ Only use the battery in connection with
the Bosch appliance.
▶ Only charge the battery using the ori-
ginal charging cable.
▶ Only use batteries from the Power for
ALL 18 V series.
Battery runtimes en
1
displays a battery
18 V 5,0 Ah
5
5½
18 V 5,0 Ah
45
35
28
12
21