Dell Precision 3660 Manuel De Maintenance page 44

Steps
1. Align the screws on the processor fan and air-cooler heat-sink assembly with the screw holders on the system board and place the
processor fan and air-cooler heat-sink assembly on the processor.
NOTE: Ensure that the triangle mark is directed towards the rear side of the computer.
2. In the sequential order (1->2->3->4), tighten the captive screws to secure the processor fan and air-cooler heat-sink assembly to the
system board.
NOTE: Tighten the screws in a sequential order (1,2,3,4) as printed on the system board.
3. Connect the processor-fan cable to the connector on the system board.
NOTE: Ensure to connect the cable to the corresponding connector with same color on the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in
Retrait du ventilateur du processeur
Prérequis
1. Suivez la procédure décrite dans la section
2. Retirez le panneau latéral.
3. Retirez l'assemblage du ventilateur et du dissipateur de chaleur du
44 Retrait et installation de composants
after working inside your computer.
Avant d'intervenir à l'intérieur de votre ordinateur.
processeur.