Publicité
Les langues disponibles
Les langues disponibles
Cleaning with Less Water
Traditional agitator-style
washer
The most striking difference in your new washer is the
low-water washplate wash system. The washer automatically
adjusts the water level to the load size. No water-level selector
is needed.
For best performance, it is recommended to load items in loose
heaps evenly around the washplate.
As the washer dampens and moves the load, the level of the
items will settle in the basket. This is normal, and does not
indicate that more items should be added.
IMPORTANT: You will not see a washer basket full of water
as with your past agitator-style washer. It is normal for some
of the load to be above the water line.
All manuals and user guides at all-guidesbox.com
What's New Under the Lid?
Washplate
Washer with low-water
washplate wash system
Automatic Load Size Sensing
Once you start the cycle, the washer will fill to the water level.
When the washer is done filling, it will start to agitate after it
determines the correct level for the load. The washer will then fill
to the appropriate water level based on the load size.
This low-water wash method uses less water and energy
compared to a traditional agitator-style washer.
Choosing the Right Detergent
Use only High Efficiency detergents. The package will be
marked "HE" or "High Efficiency." Low-water washing creates
excessive sudsing with a regular, non-HE detergent. Using
regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer's instructions to determine the amount
of detergent to use, and do not go over the Max line. See
"Using Laundry Product Dispensers" for more information.
Use only High Efficiency (HE) detergent.
Improved Cleaning
Low-water cleaning means concentrated cleaning. Rather than
diluting detergent, as done in an agitator-style washer, this
washer delivers the detergent directly to the soils. This low-
water wash also allows the clothing to move in a way that is
more effective at removing soils.
Normal Sounds You Can Expect
At different stages of the wash cycle, you may hear sounds
and pauses different from those of your previous washer. For
example, you may hear a clicking and hum at the beginning of
the cycle as the lid lock goes through a self-test. There will be
different kinds of humming and whirring sounds as the agitator
tests for load balance or moves the load. Sometimes, you may
hear nothing at all as the washer allows time for clothes to soak.
3
Publicité
