Whirlpool WFW9151YW Guide D'utilisation Et D'entretien page 8

CYCLE GUIDE — SPECIAL-PURPOSE CYCLES
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the
load being washed. Not all cycles and options are available on all models.
For best performance, not all settings are available with each cycle, and some options cannot be used together.
Items to wash Cycle:
using default cycle
settings:
Swimwear, items that Rinse/Drain
need rinsing only. & Spin
Rinse/Drain
Wet load of clothes
& Spin
All loads
No clothes in washer
Washer with
Affresh
* All temperature selections feature a cold rinse.
Load Size Recommendations
NOTE: A single item, bulky items, or tightly packing may cause imbalance. Add items or try to evenly distribute wet laundry in
the drum, and start a Rinse/Drain & Spin cycle. If the laundry is still wet, take half of the load out of the washer and try again.
For best results, follow the load size recommendations noted for each cycle.
Small load: Fill the washer drum with 3–5 items, not more than 1/4 full.
Medium load: Fill the washer drum up to about 1/2 full.
Large load: Fill the washer drum up to about 3/4 full.
Extra-large load: Fill the washer drum, but make sure clothes can tumble freely.
For best results, avoid packing tightly.
8
All manuals and user guides at all-guides.com
Temperature*:
Cold
N/A
Warm
Soak
Cold
Clean N/A
®
Spin Soil Available
Speed: Level: Options:
Ex High Delay Start
Extra Rinse
High
Medium Cycle Signal
Low TumbleFresh™
Ex High
Delay Start
High
Extra Rinse
Medium
Cycle Signal
Low
TumbleFresh™
Delay Start
No Spin
Cycle Signal
High Delay Start
Cycle Signal
Cycle Details:
This cycle adds water followed by a
high-speed tumbling. For some fabrics
you may wish to set the spin speed to
a lower setting.
To use Rinse/Drain & Spin, deselect
Extra Rinse option. Use this cycle to
spin excess water out of a load. This
cycle drains the water and spins at an
extra-high speed.
This cycle provides a soak with short
tumbling phase and a soaking time
that help improve the removal of stains,
without spin followed by drain. Drain
without spin ensures gentle treatment.
Use this cycle every 30 washes to keep
the inside of your washer fresh and clean.
This cycle uses a higher water level. Use
with AFFRESH washer cleaner tablet
®
or liquid chlorine bleach to thoroughly
clean the inside of your washer. This
cycle should not be interrupted. See
"Cleaning Your Washer."
IMPORTANT: Do not place garments
or other items in the washer during the
Clean Washer with AFFRESH cycle.
®
Use this cycle with an empty wash tub.