Publicité
Les langues disponibles
Les langues disponibles
6.
Press POWER to turn on washer
Slowly close the dispenser drawer. Make sure the drawer is
closed completely, then press and hold POWER to turn on
the washer. To cancel a cycle press POWER, then the washer
powers down, the door unlocks, and clothes can be removed.
7.
Select CYCLE
Model WFW9351** shown
Turn cycle knob to select your wash cycle. See "Cycle Guide"
for details on cycle features. Not all options and settings are
available on all cycles.
8.
Adjust cycle settings, if desired
Model WFW9351** shown
The display will show the default settings for the selected
cycle. If desired, press the button beneath each setting to
adjust the Temperature, Spin Speed, and Soil Level. Tightly
packing, unbalanced loads, or excessive suds may also
cause the washer to increase the cycle time.
NOTE: Not all settings are available on all cycles. See "Cycle
Guide" for available settings.
All manuals and user guides at all-guides.com
9.
Select additional options, if desired
(on some models)
Model WFW9351** shown
To add additional options to the cycle, press the button
for the desired option until light glows to add them to the
selected cycle.
NOTE: Not all options are available with all cycles.
See "Cycle Guide" for available options.
Delay Start
If you do not want to begin a cycle immediately, you may
choose the Delay Start option. This will delay the start
of the wash cycle by up to 10 hours.
To set Delay Start:
1. Press DELAY START until the desired delay time (in hours)
is illuminated.
2. Press START/PAUSE. The countdown to the wash cycle
will show in the display window.
10.
Press and hold START/PAUSE
to begin wash cycle
Press and hold the START/PAUSE button to start the wash
cycle. To pause a cycle in progress, press the START/PAUSE
button once, then press and hold again to continue the cycle.
To cancel a cycle, press the POWER button.
Door Locked
Once you press and hold START/PAUSE, you will hear
the door lock, unlock, and lock again. When the door locked
light illuminates, the door is locked. The door is locked
and unlocked automatically, depending on the stage of
the wash cycle.
Unlocking the door to add garments:
If you need to open the door to add 1 or 2 missed garments,
you may do so while the "Add a Garment" light is lit.
Press START/PAUSE once; the door will unlock once the
washer movement has stopped. This may take several
minutes. Then close door and press START/PAUSE again
to continue the cycle.
To add garments after the "Add a Garment" period is over, the
wash cycle needs to be canceled, the items added, and a new
wash cycle started.
11
Publicité
