Publicité
Les langues disponibles
Les langues disponibles
6.
Press and hold button (1) to exit clock setting mode.
Setting the alarm
1.
Press and hold button (1) to enter clock setting mode, short press button (1) again to
enter alarm setting mode. You will see the alarm 1 icon light up, as well as the alarm time
flashing.
2.
Turn button (2) to change the number of hours to the required value.
3.
Press button (2) once to confirm, then the device automatically switches to minute setting.
4.
Turn button (2) to change the number of minutes to the required value
5.
Press button (2) once to confirm the minutes, then turn to choose between ON/OFF for
the alarm.
6.
Press button (2) once to confirm the alarm, then turn to choose the alarm ringtone music.
7.
Press button (2) once to confirm the music, then move on to setting alarm 2.
Repeat the steps above to configure alarm 2.
8.
Press and hold button (1) to exit setting mode.
Reminder: When the alarm sounds, press button (2) to stop it.
FM radio
1.
Press button (1) to enter FM mode.
2.
Short press button (2) to automatically search for a radio station.
3.
Turn button (2) to adjust the volume.
4.
Press and hold button (2) to return to the previous station. Press twice to move to the
next station.
Comment: The turntable spins when music is played.
Reminder: Please connect the charging cable to the USB-C port to act as a radio antenna.
Battery warning
Risk of fire or explosion if the battery is replaced with the wrong type of battery.
Disposing of a battery in fire or a hot oven, crushing it or cutting it manually may
cause an explosion;
Leaving a battery in an environment where the ambient temperature is extremely high can
cause an explosion or leak of a liquid or flammable gas;
Subjecting a battery to extremely low atmospheric pressure may cause an explosion or leaks
of a liquid or flammable gas.
Please refer to the information on the underside of the packaging regarding safety and
electrics before installing or using the device.
- EN 15 -
Publicité
