Product Overview; Operation; Inserting/Changing The Battery - Renkforce Kids MD50 Notice D'emploi

7. Product overview

4
5
11
1 Handle
3 Sensitivity adjustment screw (recessed)
5 Location indicator
7 Connecting sleeve
9 Swivel joint (secured with knurled nuts)
11 Battery compartment (hidden)

8. Operation

a) Inserting/changing the battery
Insert the battery before using the metal detector for the first time. Follow the steps below:
• To insert the battery, remove the cover from the battery compartment (11) on the top of the handle. Slide the cover
in the direction of the arrow.
• Insert a 9 V block battery (not included) into the battery compartment (11) in the correct polarity (observe the
positive/+ and negative/- markings on the device).
• Slide the battery compartment cover back into place and ensure that the locking mechanism clicks into place.
To replace the battery, remove the old battery and follow the steps above.
• The battery life with a high-quality, fully charged alkaline battery is approximately 24 hours.
• Replace the battery as soon as the LED indicator (4) stops working when the metal detector is switched on.
18
6 7 8
9
10
2 On/off switch
4 LED indicator
6 Upper telescopic pole
8 Lower telescopic pole
10 Search probe