8.2 Operating parameters
The operation of the appliance is determined by the of Power and Ventilation parameters set by the user.
8.2.1 Changing the power (for Vxxeplus versions)
The power defines the quantity of combustion air and therefore has a direct impact on consumption.
To change the power:
a) Use the keys
b) Change the values using the keys
8.2.2 Changing the ventilation
To change the value of the ventilation:
a) Use the keys
b) Change the value using the keys
• "Off" = fan off
• "1" minimum, ... , "5" maximum
• "High" = ultra fast operation (to be used only if it is necessary to quickly heat an environment)
• "Auto" = automatic operation (the appliance will set the speed as a function of the temperature
of the combustion chamber
8.2.3 Opening/closing of the door (for Vxxeplus versions)
To open / close the door:
a) Use the keys
b) Press the key
c) Press the key
8.3 Mode of operation of the control panel
The control panel is supplied with Access Point configuration (AP Mode). In this mode it is possible to
connect to the panel through the App to check the device from your own smartphone.
32
to go to the "Power" menu
to go to the "Fan" menu
to go to the "Door" menu
to open the door
to close the door
004778160 - 18/08/2020
(1 minimum,...,5 maximum)