CAUTION!
Make sure the electric underblanket is spread out fully flat and does not fold or crumple during use. We recommend
switching on the electric underblanket at least 30 minutes before you go to sleep and covering it with a duvet to
prevent the heat from escaping.
Switching on
Slide the on/off switch on the controller to ON to switch on the electric underblanket. Press the temperature button to set the
required heating position (1-2-3).
Setting the heating position
Position 1: minimum heating
Position 2: medium heating
Position 3: maximum heating
ATTENTION
•
The electric underblanket heats up the fastest when you first switch on the highest temperature level.
WARNING:
If the electric underblanket is used for several hours, we recommend setting the lowest heating position (position 1) to
avoid the body overheating and thereby any potential burns to the skin or heat stroke.
Automatic deactivation function
This electric blanket has been provided with an automatic deactivation function. This means that the supply of heat is stopped
approx. 180 minutes after the electric blanket was activated.
Switching off
Slide the on/off button to position off to switch off the electric underblanket.
ATTENTION
If the electric underblanket is not used for a number of days, slide to 'OFF' to switch off
the electric blanket and remove the plug from the socket. Then disconnect the control from the electric underblanket
by removing the plug.
WARNING:
Always remove the supply plug from the mains outlet and remove the control from the electric underblanket
by disconnecting it at the connector. Otherwise there is a risk of an electric shock.
CAUTION!
The control may never come into contact with water or other liquids. It could get damaged as a result.
• Use a dry lint-free cloth for cleaning the control. Do not use chemical cleaning agents or abrasives.
• Small stains on the electric blanket can be removed with a cloth or a damp sponge and, if necessary, a little bit of gentle
detergent liquid.
CLEANING AND MAINTENANCE
EN - 16