Zyxel NBG334S Guide De Démarrage Rapide page 4

If an LED does not turn on, check your connections. If this doesn't help,
disconnect the NBG334S from its power source, wait for a few seconds and
turn it back on.
2 Accessing the Web Configurator
Default Login Information
IP address
administrator password
1 Launch an Internet browser such as Internet Explorer. Enter "http://192.168.1.1" as
shown below.
2 The Password window displays. Enter the password ("1234" is the default) and click
Login.
If the login screen does not display, make sure your computer is set to
receive an IP address dynamically. If that doesn't help, check your web
browser's security settings (see the appendix in the User's Guide for
information on both suggestions).
3 Change the password in the screen that follows and click Apply.
ENGLISH
http://192.168.1.1
1234
4