GBC Swingline CombBind C210E Manuel D'utilisation page 4

Specifications
Max. width of paper
Punching capacity paper
Punching capacity, plastic covers
Net weight
Dimensions (W x D x H)
Electrical
Subject to technical changes without prior notice.
Important safeguards
m
FOR YOUR PROTECTION, DO NOT CONNECT THE COMBBIND C210E TO ELECTRICAL POWER UNTIL YOU
READ THESE INSTRUCTIONS COMPLETELY. KEEP THESE INSTRUCTIONS IN A CONVENIENT LOCATION
FOR FUTURE REFERENCE. TO GUARD AGAINST INJURY, THE FOLLOWING BASIC SAFETY PRECAUTIONS
MUST BE OBSERVED IN THE SET-UP AND USE OF THIS PRODUCT.
The following symbols appear on this product, and their
meaning is as follows:
Power on/
off
Jam
General safeguards
• Use the CombBind C210E only for its intended purpose
of punching and binding paper and covers according to
the indicated specifications.
• Do not place anything in the punch opening of the
machine other than paper and cover stock.
• Place unit on a secure, stable work area to prevent the
machine falling and possibly causing personal injury and
damage to the unit.
• Follow all warnings and instructions marked on the
product.
• Lift the machine from the bottom, not the cover.
Helpful hints
For maximum productivity follow stages 6 to 9 starting with your front cover, then your paper sheets (20 at a time) and
finishing with the back cover.
For best results always use Swingline
The binding comb can be opened and closed again at any time to replace or add individual sheets (see step 4).
4
All manuals and user guides at all-guides.com
CombBind C210E
®
Letter, DIN A4 – 297mm
Max. 20 sheets (20lbs/80gsm)
Max 2 sheets, 0.2mm each
27.3lbs (12.4kg)
15 3/4" x 15" x 5" (400x403x148mm)
120-127V
Punch
Chip tray
full
GBC brand covers with Swingline
™ ®
Electrical safeguards
• The CombBind C210E must be connected to a supply
voltage corresponding to the electrical rating of the
machine as indicated on the serial/rating plate or in this
manual.
m
CAUTION: THE POWER RECEPTACLE MUST
BE LOCATED NEAR THE EQUIPMENT AND BE
EASILY ACCESSIBLE.
• Unplug the CombBind C210E before moving it, or when it
is not in use for an extended period of time.
• Do not operate with a damaged supply cord or plug,
after it malfunctions, or after it has been damaged in any
manner.
• Do not overload electrical outlets beyond their capacity
as this can result in fire or electrical shock.
• Do not alter attachment plug. Plug is configured for the
appropriate electrical supply.
• The unit is intended for indoor use only.
• Never push objects into this product through cabinet
slots. Do not spill liquid of any kind on this product.
• Do not operate if the product has been exposed to rain
or water.
GBC colour-coordinated binding combs.
™ ®
m