Beko WMB 81443 LA Mode D'emploi page 71

the end of the hose. When the container is full, block
the inlet of the hose by replacing the plug. After the
container is emptied, repeat the above procedure
to drain the water in the machine completely. When
draining of water is finished, close the end by the plug
again and fix the hose in its place. Turn the pump filter
to take it out.
Discharging the water when the product does not
have an emergency draining hose:
6 Technical specifications
Models
Maximum dry laundry capacity (kg)
Height (cm)
Width (cm)
Depth (cm)
Net weight (±4 kg.)
Electrical input (V/Hz)
Total current (A)
Total power (W)
Spin speed (rpm max.)
Stand-by mode power (W)
Off-mode power (W)
Technical specifications may be changed without prior notice to improve the quality of the product.
C
Figures in this manual are schematic and may not match the product exactly.
C
Values stated on the product labels or in the documentation accompanying it are obtained in laboratory
C
conditions in accordance with the relevant standards. Depending on operational and environmental
conditions of the product, these values may vary.
This appliance's packaging material is recyclable. Help recycle it and protect the environment
by dropping it off in the municipal receptacles provided for this purpose. Your appliance also
contains a great amount of recyclable material. It is marked with this label to indicate the
used appliances that should not be mixed with other waste. This way, the appliance recycling
organised by your manufacturer will be done under the best possible conditions, in compliance
with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact
your town hall or your retailer for the used appliance collection points closest to your home.
We thank you doing your part to protect the environment.
Place a large container in front of the filter to catch
water from the filter. Loosen pump filter (anticlockwise)
WMB 81443 LA
8
84
60
59
74
230 V / 50Hz
10
2200
1400
1.40
0.20
71
EN