Sony Trinitron CPD-E100 Mode D'emploi page 6

Setup
Before using your monitor, check that the following accessories
are included in your carton:
• Power cord (1)
• Windows Monitor Information Disk (1)
• Warranty card (1)
• Notes on cleaning the screen's surface (1)
• This instruction manual (1)
Step 1: Connect your monitor to
your computer
Turn off the monitor and computer before connecting.
Note
Do not touch the pins of the video cable connector as this might bend the
pins.
x Connecting to an IBM PC/AT or compatible
computer
AC IN
to video output
IBM PC/AT or
compatible computer
6
x Connecting to a Macintosh or compatible
computer
You will need a Macintosh adapter (not supplied).
AC IN
Macintosh adapter (not supplied)
Macintosh or
compatible computer
Step 2: Connect the power cord
With the monitor and computer switched off, first connect the
power cord to the monitor, then connect it to a power outlet.
AC IN
to AC IN
to a power outlet
power cord (supplied)
to video output