7.13 Range of use of the remote control
When controlling the unit with the remote control,
be sure to observe the range of use of the unit as
shown in Fig. 10. To ensure that the unit responds to
a button press on the remote control, make sure that
the remote control is within the range of use shown
when a button is pressed. Depending on the distan-
ce to the unit, the angle of use and radius change,
resulting in the respective area of use. The most fa-
10
24
GB/IE/NI/CY/MT
vourable positioning of the remote control in relation
to the unit is in the centre at the height of the display.
Please note: If there are objects, walls or other
obstacles between the unit and the remote control,
the control of the ceramic wall-mounted fan heater
with the remote control may be obstructed.