SilverCrest 373822 2104 Instructions D'utilisation Et Consignes De Sécurité page 25

7.12 Brief instruction for the remote control unit:
Control system
Turning ON/OFF
Level setting
Timer Setting
Oscillation ON/OFF
Temperature setting
Detection of open
windows
Week Timer
Cancel
Button
By pressing the button once, the device
is turned ON. By pressing the button
once more, the device is turned OFF.
Please note: The fan continues to run
for 30 seconds. The running countdown
is visible in the display for 30 seconds.
Press 1x: 1. heating level (1000 W)
Press 2x: 2. heating level (2000 W)
Press 3x: Fan
With each pressing of the button, the
time period increases by 1 hour (0H, 1H,
2H... 8H) Please note: You cannot use
this timer when the week timer is active.
By pressing the button once, the oscillation
is enabled. By pressing the button once
more, the oscillation is disabled.
Press 1x to start the temperature
setting.
You can only set the temperature
between 18°C and 45°C.
After setting the desired temperature,
press the OK button or simply wait for
5 seconds without making any entries.
See chapter DETECTION OF OPEN
WINDOWS
Select one of the 6 programs
(P1, P2... P6).
Temperature and timer settings will be
cancelled.
Action
GB/IE/NI/CY/MT 23