LG DLEX4370 Serie Manuel D'utilisation page 33

Custom program
If you have a special combination of settings that you
use frequently, you can save these settings as a CUSTOM
PROGRAM.
to save a custom program:
1. Turn on the dryer and turn the cycle selector knob to
select the desired cycle.
2. Use the cycle modifier buttons to adjust the settings
for that cycle.
3. Press the cycle option button(s) for the option you
would like to add. A confirmation message will be
shown in the display.
4. Press and hold the PGM Save button for 3 seconds.
NOTE
You may save only one custom program at a time.
Pressing and holding the PGM Save button will
overwrite any previously saved custom program.
recalling a custom program
1. Turn on the dryer.
2. Press the CUSTOM PGM button.
3. Press the START/PAUSE button to start the cycle.
Steam Functions
LG's new steam technology allows you to inject fabrics
with a swirling jet of hot steam to refresh clothes.
Simply select the STEAM FRESH™ cycle, or you can add a
steam option to selected cycles.
tm
the steam fresH cycle
STEAM FRESH™ uses the power of steam to quickly
reduce wrinkles and odor in fabrics. It brings new life to
wrinkled clothes that have been stored for an extended
time and makes heavily wrinkled clothes easier to iron.
STEAM FRESH™ can also be used to help reduce odors in
fabrics.
NOTE
• The TurboSteam option is activated by default when
the Steam Fresh™ or Steam Sanitary™ cycles are
selected.
• Depending on the load (quantity of items), you may
change the amount of time for the cycle by pressing
the MORE TIME or LESS TIME button. The display will
show 1, 3, 5, or . 3 means 3 or fewer items, 5 is
for 4 or 5 items, and
as a comforter.
indicates a large load such
tm
using the steam fresH
1. Turn on the dryer and turn the cycle selector knob to
select the STEAM FRESH ™ cycle.
2. To add an option function, select TurboSteam, or
WRINKLE CARE.
3. Depending on the load (quantity of items), steam time
can be changed by pressing the MORE TIME or LESS
TIME buttons.
4. Press Hold to Start to start the cycle.
using the steam options:
The Reduce Static option injects steam late in the drying
cycle to reduce the static electricity caused by dry
fabrics rubbing together. Change the amount of time for
the cycle by pressing the More Time or Less Time button,
depending on the load (quantity of items). The display
will show the recommended number of items, such as 7,
9, 11, 14, 16, or 18.
TurboSteam helps prevent the overdrying of clothes by
injecting steam during the drying process. The Steam
Shield Function extends the life of clothes.
NOTE
• When Sensor Dry is selected with the Reduce Static
or Turbo Steam option, a Dry level of Less or Damp
cannot be selected.
• The Reduce Static option may also be selected
during Time Dry cycles.
• After the Steam option is selected in Time Dry, the
More Time or Less Time buttons will change the
steam time only.
• After pressing Start/Pause, the More Time or Less
Time buttons will be disabled.
adding steam to a standard cycle
1. Turn on the dryer and turn the cycle selector knob to
select the Normal, Perm. Press, or Heavy Duty cycle.
2. Use the cycle modifier buttons to adjust the settings
for that cycle.
3. Press the TurboSteam button.
4. Press START/PAUSE to start the cycle.
tm
the steam sanItarY cycle
TM
The STEAM SANITARY cycle is ideal for sanitizing non-
washable items quickly and easily using only steam.
This cycle is recommended for use with cotton and
polyester materials only. (Do NOT use for urethane foam,
down feathers or delicate items)
OPErATION
cycle
33