LG DLEX4370 Serie Manuel D'utilisation page 16

16
INSTALLATION
reversing the door
wArNINg
w
THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure
to follow the instructions below can result in damage
to the dryer, property damage or injury to persons.
• To avoid damage to the dryer or the door, support
the door with a stool or box that fits under the
door, or have an assistant support the weight of
the door.
• Always reverse the door BEFORE stacking the
dryer on top of the washer.
• Avoid dropping the door to avoid damage to the
door or the floor.
1. Open the dryer door.
2. You will be removing the screws shown below
(6 on left, 4 on right).
3. Remove the four decorative screws on the left using a
screwdriver.
Open Door
Decorative
Hinge
Screw
4. Remove the two latch screws and the latch.
Latch Screw
CAUTION
Be sure to support the weight of the door before
removing the hinge screws.
5. Hold the hinge in place while removing the four hinge
screws (to prevent the door from dropping).
Hinge Screw
6. Remove the door from the cabinet cover.
Remove
Door