Beko G91635NE Manuel D'utilisation page 16

For adjusting the doors horizontally,
Loosen the fixing bolt at the bottom.
Loosen the fixing bolt at the top. Turn the
adjusting bolt on the side towards the posi-
4.1 Electrical Connection
WARNING: Do not use extension
or multi sockets in power connec-
tion.
For adjusting the doors vertically,
Loosen the fixing bolt at the bottom. Turn
the adjusting bolt towards the position
(clockwise/counter clockwise) of the door.
Tighten the fixing bolt to immobilize the po-
sition.
tion (clockwise/counter clockwise) of the
door. In order to immobilize the position,
tighten the fixing bolt at the top. Tighten
the fixing bolt at the bottom.
Fixing Bolt
Adjusting Nut
Fixing Bolt
Adjusting Bolt
WARNING: Damaged power cable
must be replaced by Authorized
Service.
• Our firm will not assume responsibility
for any damages due to usage without
earthing and power connection in compli-
ance with national regulations.
EN / 16
Fixing Bolt
Fixing Bolt
EN
DE
FR