Publicité
Your pellet stove has been approved for installation in the USA and Canada. It may also be installed in a
manufactured or mobile home. Your stove is Certified to ASTM E1509-12 (2017)and Certified to ULC S627-00.
This manual describes the installation and operation of the U.S. Stove, 5710-XH wood heater. This heater
meets the 2020 U.S. Environmental Protection Agency's crib wood emission limits for wood heaters sold
after May 15, 2020. Under specific test conditions this heater has been shown to deliver heat at rates ranging
from 10,609 to 24,676 Btu/hr. This heater achieved a particulate emissions rate of 1.5 g/hr when tested to
method ASTM E2779-10 (*and an efficiency of 76%).
Heating Specifications
Fuel Burn Rate* (lowest setting)
Burn Time (lowest setting)
Hopper Capacity
Flue Size
Electrical Specifications
Electrical Rating
Watts (operational)
Watts (igniter running)
Dimensions
Overall: Height x Width X Depth
IT IS AGAINST FEDERAL REGULATIONS TO OPERATE THIS WOOD HEATER IN A MANNER
INCONSISTENT WITH THE OPERATING INSTRUCTIONS IN THE OWNER'S MANUAL.
Note: Register your product online
at
the free app today. This app is
available only on the App Store for
iPhone and iPad. Search US Stove.
Save your receipt with your records
for any claims.
© 2022 United States Stove Company
1.65 lbs./hr. (0.75 kg/hr)
30 hrs. (approximate)
50 lbs. (22.7 kg)
3" or 4"
110-120 Volts AC, 60 HZ, 3.0 Amps
125
310
32-3/16" (819 mm) x 19" (482 mm) x 23" (585 mm)
www.usstove.com
or download
* Pellet size may effect the actual rate of fuel feed
and burn times. Fuel feed rates may vary by as
much as 20%. Use PFI listed fuel for best results.
WARNING:
2
INTRODUCTION
For Customer Service, please call:
1-800-750-2723 Ext 5050 or;
Text to 423-301-5624 or;
Email us at:
customerservice@usstove.com
Publicité
