Publicité
1.
Mark the area and then cut the wall for vent
installation if needed.
2. Install the wall thimble as specified by the
manufacturer. (wall thimble sold separately)
3. Install venting.
VENTING YOUR PELLET STOVE INTO AN
EXISTING CLASS A 6" CHIMNEY SYSTEM
IMPORTANT:
If you are installing your pellet stove as a
replacement to an existing wood stove, you
can install your pellet stove using the existing
class A 6" venting system.
1.
You must have the existing chimney system
cleaned and/ or inspected by a qualified
chimney sweep before proceeding with the
installation of your pellet stove.
2. To the right is an example of an installation
using part number 860001, 3-6" transition into
6" connector pipe. the illustration is only an
example. Please conform to any local building
codes or regulations having jurisdiction before
you have a qualified installer proceed with this
installation.
© 2022 United States Stove Company
INSTALLATION
Ceiling
Support
10
Existing Class 'A'
6" Chimney System
Support
Bracket
3" to 6" Pipe
Adapter
3" PL Vent
Clean Out Tee
Publicité
