Electrolux EK226SR Notice D'utilisation page 52

Changing over door hinges
Door hinges should only be changed by a trained expert.
Changing the door hinges must be done by two people.
Important
The door must now be held secure by somebody.
1. Unscrew the lower hinge bracket.
Remove door.
2. Unscrew upper hinge bracket.
3. Remove the pins from each of the hinge brackets,
transfer to the other hinge bracket and tighten.
This hinge bracket will later be
mounted at the bottom on the
left, as described in point 19.
52
1.
2.
3.
This hinge bracket will later be
mounted at the top on the left,
as described in point 17.
Note
Screw in the screws, push the bracket to the left as
far as it will go, then tighten the screws.
5.
6. Remove the retaining bracket and
4.
4. Transfer the bottom attach-
ment bracket.
5. Unscrew the top attachment
bracket.
6.
transfer to the opposite side.