S&P RESPIRO 100 N Mode D'emploi page 25

Once the tube has been centred, trace the fixture holes on the outside wall using the external wall attachment (4e) and
a spirit level to guarantee the precision as shown in the image below:
EN
Make the holes and insert the plugs for the wall fixture. Screw the outside wall attachment (4e) into the outside wall.
Snap the outside feeder (5) onto the outside wall attachment (4e) as shown in the images.
2) ELECTRICAL CONNECTIONS
The product must only be installed by qualified staff. Make sure that the room's supply voltage complies with the power
declared on the product's data sheet.
Make sure that the room's mains network is disconnected before carrying out the electrical assembly operations.
Identify the product version you have and read all the instructions concerning your version's electrical connections
carefully.
25