S&P RESPIRO 100 N Mode D'emploi page 20

GUARANTEE AND LIABILITY
Guarantee
The guarantee does not cover:
EN
• The mounting and dismounting costs.
• Faults that, according to Soler & Palau, are attributable to wrong installation, tampering, negligence or accident.
• Faults deriving from tampering or a repair done by persons without Soler & Palau's authorisation.
• To return a defective part, contact the installer/dealer.
Liability
The machine is designed for a ventilation system enabling air renewal for extractions from homes. Soler & Palau is not
liable for damage caused by:
• Improper use;
• Normal wear of the components;
• Failure to observe the instructions in this manual regarding safety, use and start-up;
• The use of parts not supplied by Soler & Palau.
INTENDED USE
The product is built according to industry standards and is installed to provide constant air replacement inside the room.
The recovery unit can be installed in both homes and public premises.
The product has a ceramic heat exchanger that accumulates heat during the extraction of air from the room, while
during the air intake from the outside the device transfers the heat stored in the exchanger to the cold air coming in.
The product must be installed on a wall. The tube the ceramic exchanger is placed inside is provided for a wall of a
maximum thickness of 500mm; the tube can be shortened to a minimum of 250mm.
The air extracted or taken in by the product must not contain flammable or explosive mixtures, chemical vapours, dusts,
oils and other pathogenic substances.
To enhance the RESPIRO N systems' performances, we recommend installing the recovery units in pairs so that when
one is in extraction the other is in intake.
20