Gaggenau 400 Serie Notice D'utilisation page 17

If the appliance has established a connection to the
▯
home network, the illuminated ring on the control
knob lights up green.
If the appliance was not able to establish a connection
▯
to the home network, the illuminated ring on the
control knob lights up red. Start the connection
process again.
Overview of the Home Connect settings
menu
Manually logging in to the home network (Wi-Fi): To
▯
log in to the home network (Wi-Fi) manually, you
require the network name (SSID) and password (key)
for your home network.~ "Manual Registration in
the Home Network" on page 18
Log in to the home network (Wi-Fi) with a WPS-
▯
enabled router.~ "Logging in to your home
network automatically (WPS)" on page 18
Direct connection to a compatible cooktop.
▯
~ "Connecting appliances directly" on page 23
Switch LAN or Wi-Fi off and on, e.g. while on
▯
holiday.~ "Switch the wireless network
connection (LAN or WLAN) on or off"
on page 20
Reset the Home Connect connections, e.g. for a new
▯
router, changing to a new Internet service
provider.~ "Resetting the Home Connect
connections" on page 20
Connecting the appliance to your home
network (Wi-Fi)
1.
Carry out the following operating steps one after the
other without interruption.
Open the Home Connect settings menu. ~ "Open
2.
or close the Home Connect settings menu"
on page 16
The illuminated ring around the control knob lights up
blue.
en-us
Home Connect
17